Introduction to Common Knowledge of Micro-patch Touch Switch
Release time：2019-06-24 Clicks： Click
There are some common sense to pay attention to when using the micro-patch light touch switch. What are the specific ones? Now let's introduce it to you.
There are many kinds of switches, among which the light touch switch is one of them. This kind of switch plays a very important role in our life. Let's see what kind of convenience this kind of switch can bring us.
Television, videophone, rice cooker, DVD, smart wear, audio equipment and so on are all the electrical appliances that can be seen everywhere in our home. There is an essential thing on these appliances, that is, touch the switch lightly. If there is no switch, it is absolutely a difficult problem to use the electrical appliances.
In addition, recording pens and cameras are equipped with such switches, so that criminals can inadvertently turn on the switch, record important words and deeds, and play a very important role in solving the case.
Whether you are living a normal life or living a brilliant life, you can see a light touch switch around them, as long as you can see the electrical appliances or use the technology products of the light touch switch, you can see the switch.
At present, the use of switches is very widespread, and most of the switching elements are basically belong to the type of micro-patch light touch switch, so in daily use we may often neglect some of the details of the switch, which will cause many breakdowns of the switch, so we are not as technicians. Or ordinary people, for the daily use of micro-patch light touch switch basic use of common sense, we still need to understand the specific understanding, that detailed explanation is as follows.
Mini-patch light touch switch is based on common sense.
Use common sense.
As for the current load of the switch, there is a great difference in the switching capacity between AC and DC circuits. In order to prevent potential safety problems, please use the switch within the rated current range of the light touch switch.
Common sense of using light touch switch.
When the patch touch switch is operated and installed, the metal shrapnel inside the patch should be careful not to scratch it, so as to avoid the situation that some keys can not be induced to electrify in the use of the switch.
Use common sense three.
The light touch switch should be avoided in high temperature environment, because in high temperature environment, the internal metal elements of the switch are heated and lead to accelerated aging, then it will easily lead to some breakdown problems of the switch, and second, it will lead to the shortening of the service life of the switch.
Use Attention Common Sense IV.
Do not install the switch too close to water, such as in the kitchen and toilet, when installing the switch, be sure to install the switch splash box. If there is water splashing inside the switch, it will lead to short circuit problems, then it may also directly burn the switch.
Use Attention Common Sense 5.
Touch the installation process of the switch lightly to ensure that the key switch is clean and tidy. If there are some dirty impurities or large dust particles, please be sure to handle them cleanly before installation, so as to avoid affecting the normal work of the switch.
Use Attention Common Sense 6.
In the use of some key switches with indicator lights, attention should be paid to the temperature and voltage values of the circuit board, so as to avoid the overheating of the indicator lights, which will lead to the failure of the indicator lights and affect the performance of the switches.
Use common sense seven.
As for the installation of switches, it is not necessary to install multiple lines in parallel. If multiple switches are running at the same time, their starting current is relatively large, which will cause the switch to be unable to withstand, thus causing the possibility of burning the switch.
Use common sense.
Also, before using the switch, it is best to ensure that the internal pin points of the switch are checked for errors, so as to avoid problems such as malfunctions in the use of the switch.