Importance of Safety on Touch Switch
Release time：2019-05-14 Clicks： Click
The safety of touch switch must be guaranteed, so the safety must be better. How can we calculate it? Let's give you a detailed introduction.
First, look at the appearance. According to the analysis of light touch switch manufacturer, the panel of switch and socket should be made of high-grade plastic products. It looks uniform in material and has a smooth and textured surface. Switches and sockets made of such materials can greatly reduce the occurrence of fire caused by circuit reasons.
Finally, for the socket, the first thing to consider is its security. Safety door of socket is indispensable. When you select socket, you should try to choose products with protection door.
Secondly, the switch manufacturer said that to check the fastening degree of the socket clamp, the stable insertion force is a key factor.
For the switch manufacturer of light touch switch, pure silver contacts and conductive sheets made of silver-copper composite materials are usually used, which can prevent oxidation caused by open-close arc. Silver-nickel-copper composite material is used for conductive bridge of panel.
Silver materials have excellent electrical conductivity, while silver-nickel alloys have a very strong ability to suppress arc.
Brief analysis of light touch switch manufacturer, single hole connection copper pillar, large connection capacity, not limited by wire diameter. In addition, the product panel reserved 6 to 8 fixed installation holes (up and down, left and right, and four corners), free and flexible, suitable for various installation needs.