澳门网址最新白菜网-澳门白菜网站大全平台-登录

CLASSIFY
Industry information
Location:Home > English > News > Industry information >
Introduction of the Difference between Vibration Switch and Micro Touch Switch

Release time:2019-03-29    Clicks: Click

 
What's the difference between the vibration switch and the miniature touch switch? What specifications are different when using them? Let's give you a detailed introduction below.
澳门网址最新白菜网
A vibration switch is arranged on the housing of an electronic device, in which a through hole is arranged, and the inner surface of the housing is provided with several clamping portions, and the clamping portions are arranged on both sides of the through hole, while the inner surface of the housing and the outer periphery of the clamping portions are provided with a limit portion; and the sliding switch includes a sliding body, which is clamped on the housing. The side edge of the sliding body is provided with a second limit part, which slides between the second limit part and the limit part and forms a sliding position and a two sliding position. The sliding body is convex with an operation part, which slides in the through hole. In this way, the sliding body and the operation Department are integrated to save processing and assembly costs.
Micro-touch switch has the advantages of small contact resistance charge, small error of operation force, diversification of specifications and so on. It has been widely used in electronic equipment and white household appliances, such as video and audio products, digital products, remote control, communication products, household appliances, security products, toys, computer products, fitness equipment, medical equipment, banknote checker pen, laser pen keys and so on. Because the light touch switch is directly replaced by conductive rubber or pot switch hardware bullet, such as medical equipment, TV remote controller, etc. in environmental conditions (pressure less than 2 times elasticity/ambient temperature and humidity conditions and electrical performance), large equipment and high-load buttons.
The position of the five-pin touch switch is a problem of the micro-touch switch: two pins are in a group, four pins are connected when the switch body is properly pressurized, and the fifth pin is grounded.
Micro-touch switch is the fourth generation switch product developed with the development of electronic technology. Its earlier volume is 12 mm x 12 mm, 8 mm and 8 mm. Now it is 6 mm less than 6 om. There are three types of product structure: vertical, horizontal and horizontal with ground ends. Now there are two kinds of combination (3M, 4M, SM, 6M, SM) and potentiometer light touch switch combination, which meet the requirements of various domestic electronic products. Installation sizes are 6.smm fire 4.5mm, 5.5mm fire 4mm and 6mm fire 4mm. There are 4.5mm and 4.5mm miniature light touch switches and chip light touch switches abroad. The chip light touch switches are suitable for surface assembly. At present, the use of conductive rubber switches is also popular.
Product display
Click here to send me a message

澳门网址最新白菜网|澳门白菜网站大全平台

XML 地图 | Sitemap 地图