Solution to Problems in the Circuit of Light Touch Switch
Release time：2019-03-19 Clicks： Click
Introduce to you what to do when there is a problem in the circuit of the light touch switch, and how to deal with it. Here we will give you a detailed introduction.
The manufacturer of the light touch switch said that the reed belongs to a contact device in the whole switch, so its elastic limit needs to be mastered. The general user does not know what the elastic limit is, but in the process of touching, it can be found that if the touch is successful, there will be a slight vibration, so it does not need too much effort. Of course, it is best to find a high-end manufacturer in the touch touch touch touch touch feel requirement.
Fretting switch is mainly used in the mouse, this product needs buttons in the use process, so the gasket processing should be very good, manufacturers need to give the best guarantee in the lever contact effect, fretting is in the click process can complete the work without using too much force, in the touch effect, this product can bring people a good experience.
There are many types of micro-switch, which can be divided into many types according to volume or internal construction, but the application effect is roughly the same and the principle of fabrication is the same. First, the sensitivity can be satisfied. The most important thing of electronic products is the sensitivity, no matter how many fields you divide, if there is no sensitivity. If the law satisfies the customers, the product will eventually be eliminated by the market. In the micro switch industry, what factories need to do is to do the best in dealing with each component, especially the reaction degree of shrapnel.